• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Any of you radio guys ever see, or play with one of these?

Flyingvan911

Well-known member
4,709
158
63
Location
Kansas City, MO
Wow. That's the first time I've seen one. Get a hold of a local amateur radio club. There sould be plenty of guys who can help you sort it out. If I was there I'd sure be happy to help you out.
 

maddawg308

Well-known member
Steel Soldiers Supporter
10,865
762
113
Location
Appomattox, VA
Yes, the Gonset Communicator came in several versions, and several paint jobs, but it was common in use during the 1950s and 1960s. The yellow CD paint job is by far the most catchy, and the most sought-after of the Communicator series.
 

NDT

Well-known member
Steel Soldiers Supporter
10,461
6,537
113
Location
Camp Wood/LC, TX
Hmm, 2 meter, so this would be for local emergency communications. I have never seen one of these before. I wonder if there was a shortwave version so survivors of the nuclear blasts could communicate with each other?
 

maddawg308

Well-known member
Steel Soldiers Supporter
10,865
762
113
Location
Appomattox, VA
Some more from Wikipedia:

"The Gonset Communicator was a series of vacuum tube VHF AM radio transceivers that were widely sold in the 1950s and early 60s. They were designed by Faust Gonset and manufactured by the Gonset Division of L. A. Young Spring and Wire Corp. Models were built for amateur radio, aircraft radio and U.S. Civil Defense use. The Gonsets were among the first commercial radios available for the post-World War II amateur bands and helped popularize VHF for amateurs.

The Gonset Communicators were packaged in a square box with a carrying handle and a UHF connector for the antenna on top, making them quite portable. Early models had a magic eye tube tuning indicator in front. The configuration earned them the name "Gooney Box." The radios could operate from 110 volt AC mains, or 6 or 12 volt DC from a car battery. A simple whip antenna could be plugged into the antenna connector on top. The transmit/receive switch was on the front panel, not the microphone. The Gonset could also be connected to an external speaker and used as a public address (PA) system.

The Gonset's receiver was manually tuned over the unit's frequency range with an analog dial, while the transmitter frequency was controlled by a crystal oscillator. The original model had a single jack on the front panel for an FT-243 style crystal. A chain of frequency multipliers allowed crystals in the 8 MHz range to be used. Many such crystals were available as military surplus in the 1950s. Later models had jacks for four crystals with a switch to select which one to use. Models were available for the 6 meter and 2 meter amateur bands, as well for as the VHF aircraft airband where they were often used as ground stations at smaller airfields. The civil defense model was painted yellow with CD insignia, and was available for the 6 and 2 meter bands. The 2 meter model was also used for the Civil Air Patrol, and could cover CAP frequencies which were adjacent to the 2 meter amateur band.

The first model, introduced in the November 1952 QST Magazine, sold for $189.90. The model II, introduced in 1954 cost $230. It added the bank of transmit crystals and included knobs for the transmitter tuning controls, which required a screwdriver in the original. The model III was white and had a meter instead of the magic eye. The model IV switched to a lower profile package."
 

m1010plowboy

Well-known member
Steel Soldiers Supporter
3,912
2,725
83
Location
Edmonton, Canada
For additional info there are a few nuts out there trying to capture the cold war stories on both sides of the border. With the huge number of 50's/60's fall-out stations we'd presume a ton of these radios would still be around.

I saw them in my Civil Defense searches somewhere so if I dig up the data, I'll post here. We are trying to save a 51' bunker up here so I'm interested.

http://www.civildefensemuseum.com/

http://www.civildefensemuseum.ca/
 

ReoRider

Member
165
11
18
Location
Vermont
Absolutely beautiful radio- need one to go with the paper blankets, canned water, originally stale crackers and rad meter, in the rest of the stash.
 

maddawg308

Well-known member
Steel Soldiers Supporter
10,865
762
113
Location
Appomattox, VA
Here's a pic of a couple others I took a few years back at my friend Bernie's place. You can see the yellow CD version, another less flashy version is on the left.
 

Attachments

Whiterabbit

Member
744
14
18
Location
Bristol Va.
There's a 6m version out there too. I almost got it but the price went through the roof on Peebay. :-o
Boat anchors are cool, CD boat anchors are cooler!
 

amgeneral72

Active member
487
124
43
Location
HOLLY SPRINGS GA
Well I finally scored these 2 radios.

GONSET Civil Defense Communicator 2 Meter Transmitter-Receiver
$_14-3.JPG$_14-5.JPG$_14-4.JPG


GONSET Civil Defense Communicator 3 Meter Transmitter-Receiver
$_14.JPG$_14-2.JPG$_14-1.JPG

If nothing else, they look cool.
 

MarcusOReallyus

Well-known member
4,524
816
113
Location
Virginia
Very cool. I know Bob Gonsett, son of Faust Gonsett, who invented those radios. He was hired as a consultant for some gnarly interference problems where I worked in the 90s, and I learned a lot from him. He's a real old-fashioned gentleman, and it was a pleasure to work with him. I kept up with him over the years, exchanging emails now and then. I got his newsletter back when it was printed on yellow paper. I remember him handing me the first one, and asking if I'd like to be on his mailing list.

This thread brought back some good memories of a great guy. :beer:
 

maddawg308

Well-known member
Steel Soldiers Supporter
10,865
762
113
Location
Appomattox, VA
The Gonset Communicators are alive and well at the Richmond Frostfest, a large ham radio show, that I went to today. There were perhaps 6 of them for sale at the show, 4 of them at this one table. Note the yellow CD version top right, and three of the less-flashy grey models underneath. Prices ranged from $30 to $60 for them, all were sold as "used to work well but needs TLC", in other words, AS IS.

Still a bargain considering the 1954 price was $230 each, in today's dollars that's about $2,025. !!!
 

Attachments

tennmogger

Well-known member
Steel Soldiers Supporter
1,579
543
113
Location
Greenback, TN
A 2 meter version, gray face, 4 crystal version, on loan, was the radio I made my first 2m contacts on. Still can recall the excitement of operating such a "modern" and expensive radio back then. I was earning $0.90 an hour and paying $12 a week for room and board. I could not even think about buying one then. Sorta makes me realize how cheap ham radios are today.

Bob WB4ETT
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks