• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Any tricks for removing oil filter can drain plug?

builder77

In Memorial
In Memorial
1,132
4
0
I have never been able to remove the square drain plug that you are supposed to drain the remaining oil from the cans from. I have tried to get it with the 7/16" box wrench suggested, but it just won't cut it. I can't find any other regular tools that can fit it there to get the job done. I did find some 8 point sockets from grainger, but hate to blow the money unless I have to. Any ideas?
 

builder77

In Memorial
In Memorial
1,132
4
0
Finally got it. It took a breaker bar on that poor little pipe threaded plug. I guess the maintenance guy wanted to REALLY make sure it did not work itself loose. Anyways I remembered that I had a set of sockets with the allen key on one side. I put a 1/2" drive impact drive socket backward on the allen key. Then I used the 1/2" drive to fit over the square 7/16" plug. Not pretty, but it worked just fine.
 

WillWagner

The Person You Were Warned About As A Child
Super Moderator
Steel Soldiers Supporter
8,539
2,761
113
Location
Monrovia, Ca.
Sears sells the 8 point sockets individually, under $10.
 

Blythewoodjoe

Active member
985
56
28
Location
Blythewood, SC
I have used socket extensions in the past with an adjustable wrench on the male end. If you have one that is not a perfect fit, cut two pieces of a flat stock to make up the difference. If you have a 1/2" drive extension and a 7/16 head, two 1/16" shims will reduce the 1/2"opening in the extension to a 7/16" opening. It's nice to have a port-a-band saw handy. I hope you had safety glasses on for this. You would be amazed at how fast those little pieces of metal will fly when you shatter a socket.

Joe Trapp
 

builder77

In Memorial
In Memorial
1,132
4
0
Why would I need safety glasses I have only scratched my cornea once. It kind of surprised me too as I was using a grinder, and who would have expected junk to come off with that. I do use safety glasses often, however my usual usage line is anything that has a motor attached, high pressure and sprays. For regular stuff though I usually don't. I always keep some around though, so I can put them on after I poke my eye with something.

Sears sells tools still?
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks