SausageGuy
Active member
- 117
- 35
- 28
- Location
- Kansas City MO
I am trying to figure out how fan clutch comes apart because I have a couple of the 6 allen head screws holding it to pulley spacer![20190831_185040.jpg 20190831_185040.jpg](https://www.steelsoldiers.com/data/attachments/531/531742-2d42479381ca762ed3c9c6572419b7cc.jpg)
![20190831_182137.jpg 20190831_182137.jpg](https://www.steelsoldiers.com/data/attachments/531/531741-002e4e896a9f2931e62bbc4b2e971b1e.jpg)
that are stripped out. I removed the 6 small screws on the backside holding the crescent shaped washers on. No help but can tell unit is multiple pieces but don't know how to separate it. If I can get front half off I can just torch and put vise grips on outside of bolts. Any info would be great. The fan clutch works perfect so would prefer not to damage it.
![20190831_185040.jpg 20190831_185040.jpg](https://www.steelsoldiers.com/data/attachments/531/531742-2d42479381ca762ed3c9c6572419b7cc.jpg)
![20190831_182137.jpg 20190831_182137.jpg](https://www.steelsoldiers.com/data/attachments/531/531741-002e4e896a9f2931e62bbc4b2e971b1e.jpg)
![20190831_185050.jpg 20190831_185050.jpg](https://www.steelsoldiers.com/data/attachments/531/531743-bcfeac5dc45dd608b65f4ab395815971.jpg)