1951M1078
Well-known member
- 1,018
- 185
- 63
- Location
- Glendale,AZ
Was thinking before I start biding on a truck I should go drive one. So is their anybody in the Phoenix area ? I will buy some diesel for the ride.
Randy
Randy
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Anybody have a M1078 I can test drive in Phoenix area ?
- Thread starter 1951M1078
- Start date
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
I'd love to help you out but you'd have to come down to San Antonio for a visit. How about going to Sea World for Christmas?
1951M1078
Well-known member
- 1,018
- 185
- 63
- Location
- Glendale,AZ
Think I will pass on that offer. Was looking for something closer ! LOL
But Thank You for the offer.
Randy
But Thank You for the offer.
Randy
1951M1078
Well-known member
- 1,018
- 185
- 63
- Location
- Glendale,AZ
Found a Club member here in Phoenix that has offered to take it for a spin. Anything I should know before driving ? I'm sure Allan will give me the run down but was thinking any input is good.
Randy
Randy
FloridaAKM
Well-known member
- 2,699
- 392
- 83
- Location
- Gainesville, Florida
Don't scare too many Prius drivers...... 
!
!
Ue413
Member
- 205
- 2
- 16
- Location
- Springfield, Missouri
The cab-over engine design is a bit different dynamic. You effectively sit over the front driver tire. I always have a "tippy" sensation as a result. Visibility is awesome. You will like it!
- 629
- 24
- 18
- Location
- Port orchard, WA
Visibility is awesome is an understatement. Except behind you. Turning is interesting as you wait a little longer. The truck is shorter than my crew cab long bed dodge, so it fits in parking spots, barely. So much fun and easy to drive.
coachgeo
Well-known member
- 5,142
- 3,460
- 113
- Location
- North of Cincy OH
For those that have never driven a cab forward vehicle the driving straight deeper into a turn/corner before steering into it is the biggest adjustment. That and the timing of the acceleration takes a bit of getting used to.
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
Be careful around Allen. Before you know it he'll have you converting the 1078 to a HEMTT cab with an Airstream trailer for the bed
- 1,172
- 24
- 38
- Location
- Clifton, TN
It's likely you've driven something with air brakes, but that dynamic can be a surprise too. I feel the LMTV has one of the more responsive systems I've driven. If you plan ahead a bit the myriad of gears will slow you down nicely. The truck can really be a comfortable ride, albeit without stock cup holders...![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")