Thats a setup I sold in the past....I had those brackets copied from originals....cost to much to make more.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Anyone have pictures of a luverne brush guard on ECV?
- Thread starter Mattguy
- Start date
- 755
- 1,329
- 93
- Location
- Highland, Indiana
That's a lot of work! Do you still have the part numbers for the original winch brackets? Or do you have drawings that you could share to have fabbed up? I'm surprised that more people aren't looking for that will all the 11 series trucks coming out.
NO draw
Kascar sold originals over 10 years ago.
I have 2 more sets of the shims available.
No drawings...fab shop owns them...They copied originals...and had no numbers on them.
Kascar sold originals over 10 years ago.
I have 2 more sets of the shims available.
- 755
- 1,329
- 93
- Location
- Highland, Indiana
How much did it cost fab shop to make them?
dma251
Member
- 648
- 15
- 18
- Location
- Arlington, Washington
Is there any reason why nobody seems to just do a little quick welding on those brackets to the mounting plate? Maybe I'm missing something here, but that seems like the easiest method of all.
- 4,261
- 3,872
- 113
- Location
- Brentwood, Calif
The Luverne BG was never in a TM, at least none I’ve ever seen…i still have quite a few of them, maybe 3 or 4, there were 2 bracket sets, one for the m998 3 hole bumper, the other for winch plate mounting. IMO it’s the most robust BG ever used on the hmmwv, they don’t bend like the early angle iron crap or the current issue tubular BG.
- 72
- 39
- 18
- Location
- dothan,al.
got mine mounted on 1038. cut aluminum square tubing to fit behind outer 2 bolts. looks clean.
Attachments
Hummermark
Active member
- 211
- 31
- 28
- Location
- London uk
I fitted one to my m1113 will take pictures and post
- 72
- 39
- 18
- Location
- dothan,al.
finished up mounting winch cable box.Paint waiting to dry. Clean
