• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Are our belt tensioners 6 or 8 groove?

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
Supporting Vendor
3,596
3,518
113
Location
Brooklyn, NY
2007 serpentine belt ECV 6.5 L turbo diesel.

Our our belt tensioner six or 8 groove
 

Coug

Well-known member
Steel Soldiers Supporter
3,003
4,420
113
Location
Olympia/WA
I thought all the belts were 8 groove for the HMMWV, and only the civi H1 had a 6 groove belt.


Is the belt for the turbo trucks different than the non-turbo trucks? I thought the tensioners were all smooth. Just the post 196900 trucks had lips on the edges of the pulley, but still flat as it rides the back of the belt, and that's looking in the ECV/REV parts manual.
 

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
Supporting Vendor
3,596
3,518
113
Location
Brooklyn, NY
What is the width of the eight groove belt.

I have just purchased an ECV. It is missing the belt tensioner.

I guess what I am really asking is what are the differences between an ECV serpentine belt tensioner and a civilian 6.5 liter belt tensioner? Are they interchangeable and if not… what are the differences?
 
Last edited:

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,414
4,207
113
Location
Brentwood, Calif
What is the width of the eight groove belt.

I have just purchased an ECV. It is missing the belt tensioner.

I guess what I am really asking is what are the differences between an ECV serpentine belt tensioner and a civilian 6.5 liter belt tensioner? Are they interchangeable and if not… what are the differences?
There are 2 versions of tensioner for the hmmwv, early serp and late serp…the version of serpentine dictates the model of tensioner. A2 trucks would have both versions based on build date of motor, all ECV and later would have only,one version, what referred to as the “Lipped” version, early had a smooth pulley.
Get anything Civilian out of your though process on a hmmwv turbo motor, nothing is the same.
The TM dictates by Serial number range and UOC what part is used on what engine and truck.
 

TOBASH

Father, Surgeon, Cantankerous Grouch
Steel Soldiers Supporter
Supporting Vendor
3,596
3,518
113
Location
Brooklyn, NY
Thanks Steve! It was worth at least checking.

I was trying not to bother you with question after question.

Thanks again.

You are terrific.
 

Action

Well-known member
3,576
1,559
113
Location
East Tennessee
What is the width of the eight groove belt.

I have just purchased an ECV. It is missing the belt tensioner.

I guess what I am really asking is what are the differences between an ECV serpentine belt tensioner and a civilian 6.5 liter belt tensioner? Are they interchangeable and if not… what are the differences?
About 1 1/8”.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks