welpro222
New member
- 393
- 0
- 0
- Location
- Bellingham, WA
Whats the easiest fix for leaking ARP Head Studs?
I tapped all holes, break cleaned all studs and let dry, sealed them with Permatex Thread sealant with teflon (white goey stuff). I'm thinking most of the sealant might have rubbed off when I pushed studs through heads into the block?
Pull one at a time and reseal with teflon tape?
Bar's Leak?
Let it leak?
I tapped all holes, break cleaned all studs and let dry, sealed them with Permatex Thread sealant with teflon (white goey stuff). I'm thinking most of the sealant might have rubbed off when I pushed studs through heads into the block?
Pull one at a time and reseal with teflon tape?
Bar's Leak?
Let it leak?