kipman
Active member
- 2,514
- 15
- 38
- Location
- Lancaster Ohio
I am looking for two doors for my mep002A with ASK, need the battery door and the door that covers the oil filter. any help would be great.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Ask doors for MEP002A
- Thread starter kipman
- Start date
I can't help you with your doors, but I hope you can help me with my ASK. I purchased the kit after the gen set, but it didn't come with any hardware. Can you tell me what the screw size is that attahces the pannels together? I think it's 1/4-20 but after about a thread, I hit some resistance. I assume this is some sort of thread locker because 5/16 are too big and #10 screws are too small.
Thanks for the help.
Thanks for the help.
AaronW
New member
- 870
- 3
- 0
- Location
- Napavine,WA USA
Hey 762, Military stuff tends to be SAE. Try 1/4-28.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 757
- 113
- Location
- Cincy Ohio
Actually, they are some kind of shoulder bolts. I will see if I have one I can get a measurement off of tomorrow.
Westech
CPL
- 6,104
- 208
- 63
- Location
- cow farts, Wisconsin
For Sale Ads and/or Want Ads are NOT allowed to be posted in the forums. Please use the Classified Ads!
AaronW
New member
- 870
- 3
- 0
- Location
- Napavine,WA USA
Westech, I understand where you are going with this. However, the original post was from May 2010. The second post was being asked in a good place versus starting a new thread. I think 762 actually used the search function.
Westech
CPL
- 6,104
- 208
- 63
- Location
- cow farts, Wisconsin
Aaron... Kipp is a good friend of mine... I just razzing him... pill dude pill
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 757
- 113
- Location
- Cincy Ohio
Aaron, both Kip and Westy belong on the short bus, pay them no attention!
AaronW
New member
- 870
- 3
- 0
- Location
- Napavine,WA USA
good deal. haha. I'm chill. Just getting my post count to 601 so that I can scam members here!
- 756
- 4
- 18
- Location
- C.G. JMTC MICHIGAN
Man you guy are so fun we weeeeeeee.
Westech
CPL
- 6,104
- 208
- 63
- Location
- cow farts, Wisconsin
Do you take out of state checks? HAHHA
kipman
Active member
- 2,514
- 15
- 38
- Location
- Lancaster Ohio
I feel like I fell off the short bus.
And now for something completely different,
Yes I did use the search function. With over 50 PAGES of aux eq I didn't want to add to the noise.
I would greatly appreciate the help.
The TM also specifies teflon tape at the joints. I assume this helps with vibratin damepning and pannel chafing. Is it just a good idea or is it necessary to prolong the life of the unit?
Yes I did use the search function. With over 50 PAGES of aux eq I didn't want to add to the noise.
I would greatly appreciate the help.
The TM also specifies teflon tape at the joints. I assume this helps with vibratin damepning and pannel chafing. Is it just a good idea or is it necessary to prolong the life of the unit?