Hornet Driver
New member
- 10
- 0
- 0
- Location
- Saskatchewan Canada
I have a CDN M1010 and have replaced everything as per the instructions on here. My problem now is that since putting in a converter to 12 volts for the glow plug system I can't get the voltage to go above 1.2v when converted. As soon as I put the inline fuse it drops it to 1.2v. Without the fuse its at 13.8v.![Banging Head aua aua](https://www.steelsoldiers.com/images/smilies/icon_smile_banghead_125.gif)
![Banging Head aua aua](https://www.steelsoldiers.com/images/smilies/icon_smile_banghead_125.gif)
![Banging Head aua aua](https://www.steelsoldiers.com/images/smilies/icon_smile_banghead_125.gif)
![Banging Head aua aua](https://www.steelsoldiers.com/images/smilies/icon_smile_banghead_125.gif)
![Beat the dead horse :deadhorse: :deadhorse:](https://www.steelsoldiers.com/images/smilies/beatdeadhorse.gif)
Any help would be great. The wealth of knowledge on this site is second to none.
Thank you in advance.
![Banging Head aua aua](https://www.steelsoldiers.com/images/smilies/icon_smile_banghead_125.gif)
![Banging Head aua aua](https://www.steelsoldiers.com/images/smilies/icon_smile_banghead_125.gif)
![Banging Head aua aua](https://www.steelsoldiers.com/images/smilies/icon_smile_banghead_125.gif)
![Banging Head aua aua](https://www.steelsoldiers.com/images/smilies/icon_smile_banghead_125.gif)
![Beat the dead horse :deadhorse: :deadhorse:](https://www.steelsoldiers.com/images/smilies/beatdeadhorse.gif)
Any help would be great. The wealth of knowledge on this site is second to none.
Thank you in advance.