Aux Fuel Tank for MEP-803A, Bung Adapter for 3/4" Port?

[Mweiss]

As it turned out, my search for a 55 gallon oil drum is not turning up any barrels with two 2" ports. The ones local to me have a 2" and a 3/4" port. I need a 2" port for the oil filler as that's what the oil delivery truck needs.
That leaves me with only a 3/4" port to attach the fuel line.
I reckon there might be an adapter for 3/4", but I only found and bought a 2" bung adapter kit online.
Looking for recommendations for hardware to use the 3/4" port for the fuel line. Where to buy, etc.

 

[Scoobyshep]

I think a NPT nipple will thread into that. an extra thick layer if teflon tape should hold it. I made something similar for a fuel can with a hose fitting and pickup tube.

 

[Toolslinger]

You could use a slip through compression fitting with a piece of copper tube, and then put whatever fitting you want on the end.
This is a 3/4 NPT x 3/8 tube, but they come in other sizes.