tcruwithme
Member
- 244
- 20
- 18
- Location
- Eagan, MN
Zerostart block heaters are made by Phillips & Temro out of Eden Prairie, Minnesota (western suburb of Minneapolis). I recently put a 3500025 on my Deuce, but it was very hard to find. An internet search didn't bring up anything. The 3500025 is listed as for the Hercules/White engines, is a 1,000 watt, 120 volt, 2" frost plug block heater. I got a PM from another SS member asking where I got my Zerostart 3500025, so I contacted the manufacturer to see if they are still made.
Ian Vriese at Phillips & Temro told me by e-mail at 8:03 a.m. CST on December 10, 2014 that they still make these heaters, that they have them in stock, and that they can be ordered at any of the following retailers:
All State
I-State
Rihm
Boyer
O’Reilly
Bumper to Bumper
I got mine at O'Reilly for $70, but it was the last one they had in the entire company. This is good news that Phillips & Temro have these in stock, so they can be ordered. I hope this news helps other SS members in your search for a good block heater. Here are a couple of pictures of the 3500025:
Here is a PDF file of the installation instructions that came with the heater:
View attachment 3500025 Installation Instructions.pdf
Ian Vriese at Phillips & Temro told me by e-mail at 8:03 a.m. CST on December 10, 2014 that they still make these heaters, that they have them in stock, and that they can be ordered at any of the following retailers:
All State
I-State
Rihm
Boyer
O’Reilly
Bumper to Bumper
I got mine at O'Reilly for $70, but it was the last one they had in the entire company. This is good news that Phillips & Temro have these in stock, so they can be ordered. I hope this news helps other SS members in your search for a good block heater. Here are a couple of pictures of the 3500025:
Here is a PDF file of the installation instructions that came with the heater:
View attachment 3500025 Installation Instructions.pdf