• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

axle hub flip or swap?

green goat

New member
19
0
1
Location
Fort Worth, TX.
Has anyone experimented with reversing hubs on a 900A2 series truck? I don't think it will work but not sure. Would the older truck hubs interchange on the A2 axles?
 

green goat

New member
19
0
1
Location
Fort Worth, TX.
Thanks for your response. I seemed to remeber reading this somewhere but just couldn't seem to come up with the correct search to find it again. I started pulling my CTIS off yesterday so could put on my new tires and found that two of the valves were full of oil. I figured a seal had failed for this to have happened thought this would be a good time to flip them if possible. Thanks again.
 
Top