• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Battery box wiring

jim1131

Active member
118
35
28
Location
Illinois
Does anyone know what this is used for? The harness pictured is connected to the negative post and comes out to this box at the rear left corner of the battery compartment20211110_121735.jpg. Relocating my batteries and wanting to remove any unused wiring.
 

86humv

Well-known member
Steel Soldiers Supporter
1,700
501
113
Location
Texas
Those are not for the trans...trans is a red button type.
Those are for an accessory that was removed.....looks like a fire system wire laying in battery box also.
 

Action

Well-known member
3,576
1,557
113
Location
East Tennessee
Does anyone know what this is used for? The harness pictured is connected to the negative post and comes out to this box at the rear left corner of the battery compartmentView attachment 850257. Relocating my batteries and wanting to remove any unused wiring.
I think those are a/c circuit breakers. 2 for the 4-door trucks. I only have 1 circuit breaker there in my m1152. You have twice as many condensors and evaporators than I do.
 

86humv

Well-known member
Steel Soldiers Supporter
1,700
501
113
Location
Texas
I think those are a/c circuit breakers. 2 for the 4-door trucks. I only have 1 circuit breaker there in my m1152. You have twice as many condensors and evaporators than I do.
Your probably right.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks