cundupa
Member
- 142
- 0
- 16
- Location
- Holland, MI
I think I'm having trouble with the battery switch on my M817. It has 4 terminals, 1 hot 3 switched. When I turn it on only the 459 wire gets power, goes to the control box. The wires, 54, to the fuel solenoid and starter switch are dead. I put a used one in and it does the same thing, both bad? If I cross the solenoid at the starter it will start and run most times. Must back feed something and wake it up.
Any ideas out there?
Thanks
Any ideas out there?
Thanks
Last edited: