therooster2001
Active member
- 824
- 43
- 28
- Location
- Colorado
Wondering what people do besides completely sanding down the uneven spots that a little rust and or flakes have left before applying Behr paint. I know the Behr is self leveling, but I would think something like glazing putty might be the right thing. With most small surface rust, it was a quick wire wheel and it went right over it, but the flat surface on the bumper and a couple of areas need some help. I want it to go over the CARC so no bondo or things that won't stick to existing paint.
What works?
![ImageUploadedByTapatalk1441550490.614897.jpg ImageUploadedByTapatalk1441550490.614897.jpg](https://www.steelsoldiers.com/data/attachments/395/395851-40f5c0fe36f753ed0e5eed146aa4da3f.jpg)
The chips and flakes actually go down to the metal, I had hit it with a rattle can until I could do the prep., this isn't a flaking layer adhesion problem..
What works?
![ImageUploadedByTapatalk1441550490.614897.jpg ImageUploadedByTapatalk1441550490.614897.jpg](https://www.steelsoldiers.com/data/attachments/395/395851-40f5c0fe36f753ed0e5eed146aa4da3f.jpg)
The chips and flakes actually go down to the metal, I had hit it with a rattle can until I could do the prep., this isn't a flaking layer adhesion problem..
Last edited: