bendix plug on generator regulator

[1951m37]

Good afternoon everyone. I hate to bother anyone, but I could use a little information if anyone could help me. I have a 1951 M37 that I need to replace the wires in the four pin male bendix plug that connects to the regulator. I have disconnected the plug, removed the screw on rear cap and moved the rubber insert back to expose the wire pins. Can anyone give me advice on how to remove the pins from the connector so I can r&r wires. I am trying to avoid damaging the connector. Many thanks.

 

[sue]

Aviation pin, extractor and pin installation tool

 

[1951m37]

Thank you sue for the info. I will try to find the tool you mentioned. Again, thanks for your reply.