Big tractor 24in wheel?

[Alredneck]

Howdy all, been looking at tractors these days since the demise of the dastly dodge!
Question is, I have noticed that on the M911, M920, M916 tractors are running 24in rims and tires. Will the 20in HEMMT rims fit on these trucks, cause I think super singles would look sweet on some plus the cost of 24s is up there, well some bling 24" Alcoa's would look nice!

 

[Andy1234]

Didn't Reb87 put them on a M919?

 

[Alredneck]

Andy I dont know, I thought there was a discussion about this before but couldnt find it.

Oh yea your bolster trailer is safe and sound and I got ya a spare for it as well!

 

[bassetdeuce]

... demise of the dastly dodge!...

You killed it? When did this happen?

 

[Alredneck]

I was dragging a deuce out to Phoenix AZ for a fellow member and she just quit driving up one of the mountains just east of Tuscon. Took her off the trailer and towed it to the dealership thinking it might be a sensor ( truck has 120k+ ) but found out the motor was locked up. Mechanic has 24in breaker bar on it trying to get the motor to move. I bid on some yard tractors to get a 5.9 cummins out of but they went to high. I wish this 6V92 would fit in her but not likely unless mount it in the bed then where would my gooseneck go? She will be revived its just going to take a lil time! And this time shes coming back OD green as well! I will take pics of the build.

 

[Andy1234]

Oh yea your bolster trailer is safe and sound and I got ya a spare for it as well!

Sweet, thanks!

Andy

 

[M1075]

Howdy all, been looking at tractors these days since the demise of the dastly dodge!
Question is, I have noticed that on the M911, M920, M916 tractors are running 24in rims and tires. Will the 20in HEMMT rims fit on these trucks, cause I think super singles would look sweet on some plus the cost of 24s is up there, well some bling 24" Alcoa's would look nice!

Yes, they fit on the M916-M920 with minimal modification.

 

[Varyag]

All you guys who switch them out should get a hold of the 10 tons guys and do a trade. i am sure radials would be really nice on a 125.

 

[M1075]

All you guys who switch them out should get a hold of the 10 tons guys and do a trade. i am sure radials would be really nice on a 125.

Only the M911 has 14R24s which could be used on 10 tons. The M916-M920 use 11R24.

 

[Alredneck]

Thanks for the info, James I will be out your way here in the next week or two picking up some stuff.

 

[reb87]

Here is the post about my m919. There are clearance issues on the front (rim and brakedrum)
http://www.steelsoldiers.com/5-ton-up/39263-m919-gets-16-00-zxls.html

http://www.steelsoldiers.com/5-ton-up/42177-m919-harvest.html

Ross