Blackout Drive Light

[hrbergeron]

I have a problem with my blackout drive light. It is in my CUCV II, but from everything I have seen in comparison to my other vehicles it is a very similar setup as a CUCV I.

In blackout lights "on" and b.o. drive "on", I am getting no voltage to the B.O. drive light. All the other b.o. side lights are getting voltage. I have tried it with the vehicle running and not running. Thoughts? Bad switch? Something else?

 

[Mainsail]

Probe the back side of the switch to determine if there's power there. That will easily/quickly rule out the switch if you don't have power there either.

Fuse?

 

[joshuak]

Are you getting voltage to the tan white wire ? How about plug at the firewall?

 

[hrbergeron]

Discovered that the switch itself was not working properly. It is the same exact switch used on a CUCV I. Swapped it out with one in my parts bin and now it works.