Blackout lamp positioning

[w200/m880]

ive got some new blackout markers for truck,they have been fitted in the past but theres no big hole to put packard connectors through,i can drill a big hole but was wondering why.
i need little tin brackets to attach front ones to grill if anyone has any suggestions.

 

[Carter]

Dis-assemble the connector then the wire will fit through the small hole. Slide back the sleeve on the wire, remove the C clip then slide the sleeve off of the wire.

 

[w200/m880]

well done,thank you very much.

 

[Carter]

No problem, only took a couple of min. to get the wires and take the pix.

 

[marsman]

Always fun to drive with in the field.

 

[w200/m880]

tell us what your experiance was.

 

[Wy-m880]

I had a very fun experiance with my black out lights,all my lights was on very non-working terms, and when they did work they would only work on service light, thinking this was odd, traced all wires, which were good, then checking the wire positions on the 3 lever switch plug some one turned the rubber part on the plug, checked it it was 180 degrees off, lol taking the rubber and turning the rubber only part, the lights came to life, everything, service, brakes and black outs on every setting of the switch, the previous owner had given up, on it thinking the wiring WAS *BEEPED* up beyond repair, talk about simple things bitting us in the' a-double s', now i have a working m880, and its very worthy of restoring