Long story, I bought a 2001 C3500 6.5 engine off eBay. It was supposed to be a runner but I decided to reseal it regardless. Good news is that a teardown revealed it to be a 2004 GEP engine. Bad news the block has 0.010 of wear from the head gaskets. I had the heads gone through and the block resurfaced. I'm not super happy with the work done on the heads. The engine has always blown bubbles since. I got one head off today and found no issues with the head gasket but did find a crack in the head. Not super happy with the staking of the precups. I won't say more. I am interested in options, not my own prejudices
![1000000800.jpg 1000000800.jpg](https://www.steelsoldiers.com/data/attachments/669/669558-7ebd329cb435635ecf32155a6d483d49.jpg)
![1000000801.jpg 1000000801.jpg](https://www.steelsoldiers.com/data/attachments/669/669559-55e2cadf8c38350beacc6491ef844247.jpg)
![1000000802.jpg 1000000802.jpg](https://www.steelsoldiers.com/data/attachments/669/669560-affdbe81b48616e2daf50ad54c4345e6.jpg)
![1000000800.jpg 1000000800.jpg](https://www.steelsoldiers.com/data/attachments/669/669558-7ebd329cb435635ecf32155a6d483d49.jpg)
![1000000801.jpg 1000000801.jpg](https://www.steelsoldiers.com/data/attachments/669/669559-55e2cadf8c38350beacc6491ef844247.jpg)
![1000000802.jpg 1000000802.jpg](https://www.steelsoldiers.com/data/attachments/669/669560-affdbe81b48616e2daf50ad54c4345e6.jpg)
Attachments
-
195.9 KB Views: 20
Last edited: