coastalconstruction
New member
- 25
- 0
- 0
- Location
- anacortes wa
What is the best / simplest way and what parts do I need to bob a duece? How will it prefrom?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Bobbing the Deuce
- Thread starter coastalconstruction
- Start date
- 1,878
- 15
- 0
- Location
- Glen Arm Maryland
More info on this site about bobbing a deuce than probably any other subject. This is the spot to pull from the pros. Please take pictures and post. I want to bob mine, but have to build a garage to do it. Good luck
sprucemt
New member
- 554
- 14
- 0
- Location
- Warrensburg NY
I bow to the ever present thoughtfullness of Doghead.
- 1,156
- 2
- 0
- Location
- Santa Clarita, Ca
There is no simple way if you dont have access to a fork lift, plasma cutter or torch set up but it can be done with lots of 4" cut off wheels on a grinder, a few drill bits, 2 big jack stands and a cherry picker! Go through and read the posts on "bobbing" as quite a few of us have documented the process with lots of pics and tips. Its well worth the time and effort and after recycling all the extra metal it almost pays for itself. In my opinion the truck becomes much more fun to drive with the shedding of close to 2000lbs.