carmen
Member
- 72
- 0
- 6
- Location
- Pittston, Pa. 18640
Getting the M715 back together, went all the way down to the bare frame. Anyway I need to know where I can get the body mounts that the body rest on. any ideals???
Carmen
Carmen
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Body mounts
- Thread starter carmen
- Start date
- 7,584
- 361
- 83
- Location
- Cheyenne, WY
Just a guess but wouldn't the gladiatior mounts be the same? Auto-parts store/dealer???? ![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]")
carmen
Member
- 72
- 0
- 6
- Location
- Pittston, Pa. 18640
Don't know if they are the same. The ones I took off were round.
Carmen
Carmen
sermis
Active member
- 1,844
- 17
- 38
- Location
- Temple, TX
I used solid rubber that had a hole in the center. It came in 16" or 24" long, don't remember. JC Whitney, boat dealer, 4 Wheel Drive, etc. Cut them to the size needed
Jump over to www.M715zone.com. Post up there.
There has been a lot of discusson in the past. The server crashed a while back so the original posts might be gone.
Jump over to www.M715zone.com. Post up there.
There has been a lot of discusson in the past. The server crashed a while back so the original posts might be gone.
carmen
Member
- 72
- 0
- 6
- Location
- Pittston, Pa. 18640
Thanks for all the replies. Carmen
rdixiemiller
Active member
- 1,760
- 3
- 38
- Location
- Olive Branch Mississipi
Go to any Jeep dealer. The old J2000 mounts were round, the cabs are interchangeable I believe.