Bolts Required to Mount Airlift Bumper on m1030 with Rhino Spare Tire Carrier

[Stevepsc]

I have acquired the raw bumper, all the brackets needed, the pintle extension and the spare tire carrier. I need a list of nuts, bolts washers and alike to allow me to install. I have tried my hand at searching the TM's and I know it is there, but I can't find it. Any help would be appreciated.


Steve in SC
1986 M1038

 

[Action]

TM 9-2320-280-24-p1
in the frame and towing attachments section.
figure 188 in the 2004 version.

 

[ohiohmmwv]

This is what I had notes on when I built mine with the mudflaps. Should be pretty accurate.
---all 1/2"-13 thread sizes grade 8
----------- 8x. 4.5" total
------------2x. 4" total
------------4x. 3.75" total
------------8x. 3.5" total
------------8x. 3.25" total
------------8x. 1.5" total
------------60x washers total
(Can substitute 16x 7/16 washers on mud flaps)-they fit nice.
------------38x lock nuts total
----.25" thread sizes-electrical plug
------------6x 1.25"(.25" thread)
------------12x .25" washers
------------6x .25" lock washers