mdmorgan
AM3 U.S. Navy
- 1,085
- 103
- 63
- Location
- Forsyth, Ga.
Pulled the jerry can holder off (was thinking about mounting a spare to the front) and noticed this. What's it for?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Bracket thing on m1102, what is it?
- Thread starter mdmorgan
- Start date
Piper Cub
Member
- 649
- 2
- 18
- Location
- Palmdale, Ca / Flagstaff, Az
I don't have a clue, but mine has the same thing on it.
DeadParrot
Active member
- 213
- 47
- 28
- Location
- oklahoma city, ok
On page 4-39 of the TM, it shows a jack being stored there. Mine didn't have a jack either.
Piper Cub
Member
- 649
- 2
- 18
- Location
- Palmdale, Ca / Flagstaff, Az
I thought of that, but my jack wouldn't fit on there. Maybe it's a different jack than the ones that usually come on them?
mdmorgan
AM3 U.S. Navy
- 1,085
- 103
- 63
- Location
- Forsyth, Ga.
Just read the TM(thanks for the page number), it's called the jack spacer, it goes on top of the scissor jack and the cupped part is for the lower shock eye to nest in when jacking the trailer. The jack itself doesn't actually mount to it when on the trailer.
- 5,580
- 349
- 83
- Location
- DESOTO, KANSAS
Thanks for clearing it up, that boxy piece MD has fingered sits on top of the mil issue scissor jack 
that used to come with all kinds of MV's and is still part of the #1 common tool set.
Last edited:
- 7,058
- 149
- 63
- Location
- Mid Hudson Valley NY
your supposed to use the Prime Movers jack (HMMWV) and the adapter to change the tire on the trailer.