- 574
- -21
- 18
my brake switch sticks. i dont know why. my switch is a brand new updated switch i installed last week when i rebuilt my air pack. its installed in the proper location. any ideas??
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
brake light switch sticking
- Thread starter Big Mike's Motor Pool
- Start date
- 7,055
- 138
- 63
- Location
- Mid Hudson Valley NY
The Air switches take a second or 2 after you release the brake pedal to turn off the lights.. It's just how they are.
Rocco
New member
- 377
- 2
- 0
- Location
- Lynchburg VA
try switching the wires around.
chrismanby
New member
- 9
- 0
- 0
- Location
- Copenhagen
Hi.
Had a lot of troubles with my brakelight switches also. One that would not go out and one that would not go on.
Found out that some (wise ?) guy had installed 4 brake lights on each side. Think the brake amperage was just to much for the small switch contact surface in the switch. To satisfy my curiosity, I took one appart.
Here is what it looks like when it is taken appart. (can not be put together again )
Sorry for thepoor quality photo.
Had a lot of troubles with my brakelight switches also. One that would not go out and one that would not go on.
Found out that some (wise ?) guy had installed 4 brake lights on each side. Think the brake amperage was just to much for the small switch contact surface in the switch. To satisfy my curiosity, I took one appart.
Here is what it looks like when it is taken appart. (can not be put together again )
Sorry for thepoor quality photo.
