Brakes Issue...Need Assistance Please

[gungearz]

I picked up a brake cylinder hone at harbor freight that ranges from 3/4" to 2 7/8" more like 2 3/4"... If the bore falls within those dimensions. It should cut it... Never honed a air pack but I did hone and rebuilt a m/c on a 63' impala... Cylinder hone ran about $10. Works good.

 

[welldigger]

Don't you think a brake cylinder hone would work a lot better...?

For the brake fluid side, yes you need a brake cylinder hone of the correct size. For the air end you need an engine cylinder hone.