• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Brakes, Out!

Bowmanvolfire

Member
55
6
8
Location
Wichita Falls/Texas
Hello Forum:

We are looking for some help. Our department recently acquired a 1967 Kaiser M109 A3. While driver training the other day the brake pedal went to the floor. We found no visible fluid leaks or line issues. A couple of our mechanics are thinking the master cylinder went out.

Any thoughts?

Thanks.

John
Chief, BCVFD
 

NDT

Well-known member
Steel Soldiers Supporter
10,501
6,631
113
Location
Camp Wood/LC, TX
Suggest refill the master cylinder and bleed the system. Closely monitor the brake fluid level during weekly equipment checks.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
Dot5 silicone brake fluid should be used unless it has been converted to something else.

Never mix dot5 with dot3.

Was the master cylinder empty?
 

Floridianson

Well-known member
Steel Soldiers Supporter
7,409
2,503
113
Location
Interlachen Fl.
Pull the rubber boot back off the master cylinder push rod just a bit and if it's leaking then you will see it. Oh don't be right under the master when you do it or you will feel it.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks