Third From Texas
Well-known member
- 2,722
- 6,389
- 113
- Location
- Corpus Christi Texas
Installed new cab bushings onto the passenger side. Pretty straight forward.
But looking over the driver side, it appears that it will be a nightmare. The assembly is tucked in behind the steering gearbox on one side and the radiator on the other. There is no access from above, fore, or aft.
Cab up and there is no way to get under the bushing.
Cab down and it's about 12" up thru numerous hoses and line offering only enough space to see the nut.
I might be able to jerry rig some sort of extension for my impact gun, but I'm not sure that I can even reach up in there to pull the plate and old bushing out.
Anyone tackled this before have any tips?
But looking over the driver side, it appears that it will be a nightmare. The assembly is tucked in behind the steering gearbox on one side and the radiator on the other. There is no access from above, fore, or aft.
Cab up and there is no way to get under the bushing.
Cab down and it's about 12" up thru numerous hoses and line offering only enough space to see the nut.
I might be able to jerry rig some sort of extension for my impact gun, but I'm not sure that I can even reach up in there to pull the plate and old bushing out.
Anyone tackled this before have any tips?