Cab Latch Rebuild Kit

[Towbarman]

Trying to find a rebuild kit for any of the FMTV's instead of buying the whole latch at $400.00 a piece. If there is a TM that has the NSN, I would be happier than a pig in mud. Thank. Towbarman

 

[coachgeo]

as you might guess...... this question has been asked as much as "what oil do I use" . suggest you search first...... BUTTT that said..... since a new choice litterally just arrived on the market. and that might get lost in a search.... untill a month or so ago... there were no parts available for inside the handle. Now there is... Try search for [ Eco Hubs door handle ] those key words are because they fellow who manufactures the Eco Hubs is the fella making the door handle parts.

PS- aftermarket replacments with little work installing are NOT 400 dollars and their is videos online about them... Mike's stuff is still less costly though.

 

[hike]

I thought @Towbarman was asking about the air over hydraulic cab latch (locking the tilt), not door latches which break all the time?

 

[GeneralDisorder]

@Suprman has the kits. I think this is his listing:

MILITARY LMTV TRUCK HYDRAULIC CAB LOCK LATCH SEAL O-RING REBUILD KIT LH50000104 | eBay

Includes the 5 pieces pictured. Seal on the piston, seal for the piston tunnel, front and rear of piston wipers and an o ring for the cap. Why spend big bucks replacing your latch when it can be rebuilt.

www.ebay.com

FYI - these latches are shared between the FMTV's and the F22 Raptor fighter jet. Such a weird cross-over.

 

[Towbarman]

Yes, I was talking about the hydraulic over air cab latch. I looked at the attached photo. That's what I need. Apparently I didn't see the part number for it. If there is a part number, I'd be happy like a pig in mud. Thanks for the information.

 

[coachgeo]

Yes, I was talking about the hydraulic over air cab latch. I looked at the attached photo. That's what I need. Apparently I didn't see the part number for it. If there is a part number, I'd be happy like a pig in mud. Thanks for the information.

ahhhhhh.. sorry about that... my brain went to door. Did you look at the parts spread sheet?

 

[coachgeo]

ahhhhhh.. sorry about that... my brain went to door. Did you look at the parts spread sheet?

drat.. just looked. its not listed there. seem to recall there is a kit though... or folk just used generic O-Rings. Ill check deeper

 

[coachgeo]

MILITARY LMTV TRUCK HYDRAULIC CAB LOCK LATCH SEAL O-RING REBUILD KIT LH50000104 | eBay

Includes the 5 pieces pictured. Seal on the piston, seal for the piston tunnel, front and rear of piston wipers and an o ring for the cap. Why spend big bucks replacing your latch when it can be rebuilt.

www.ebay.com

CAB HYDRAULIC LATCH REPLACEMENT/ADJUSTMENT

 

[Towbarman]

Coachgeo
Thanks for the help. I wish I could use the generic o-ring kit, but the o-ring on the piston is a square type. I'll keep looking online or get a hold of other item manager. Towbarman

 

[coachgeo]

Coachgeo
Thanks for the help. I wish I could use the generic o-ring kit, but the o-ring on the piston is a square type. I'll keep looking online or get a hold of other item manager. Towbarman

confused..... the flat sided ring needed is not in the above kits?

BTW- this helps me out too... I got one to rebuild too.