Roaddog58
Member
- 146
- 0
- 18
- Location
- Dorset Ohio
Has anyone tried to put a 8.3 motor into a deuce? If not, whats the problem, If so what to do? Thanks
Last edited by a moderator:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Can a 8.3 Cummins go into a deuce?
- Thread starter Roaddog58
- Start date
- 1,704
- 414
- 83
- Location
- Leavenworth, KS
I don't think you'll find much info here about Cummings engines.
I haven't looked into fitting an 8.3 in a deuce myself, but I've seen several good threads on the subject. Just search "8.3 Cummins in a deuce". Here's a good thread: http://www.steelsoldiers.com/showthread.php?98623-Deuce-re-power-with-Cummins-8-3-from-931A2/page2
I haven't looked into fitting an 8.3 in a deuce myself, but I've seen several good threads on the subject. Just search "8.3 Cummins in a deuce". Here's a good thread: http://www.steelsoldiers.com/showthread.php?98623-Deuce-re-power-with-Cummins-8-3-from-931A2/page2
HanksDeuce
Well-known member
- 1,082
- 246
- 63
- Location
- Prairieville, LA
I put a Cummins 5.9L in my deuce and love it!
- 3,752
- 1,529
- 113
- Location
- North Carolina - FINALLY !
No "G" no "G" for the love of God, no "G"
Jeepsinker
Well-known member
- 5,399
- 457
- 83
- Location
- Dry Creek, Louisiana
It will never stop.
- 9,580
- 218
- 63
- Location
- Dickson,TN
Fixed the title.
- 1,397
- 380
- 83
- Location
- Feasterville, Pennsylvania
yes it can be done
see pictures https://www.easternsurplus.net/Gallery/galleryDetails?title=M35A2-Turbo-Diesel-Conversion
dave
www.easternsurplus.net
see pictures https://www.easternsurplus.net/Gallery/galleryDetails?title=M35A2-Turbo-Diesel-Conversion
dave
www.easternsurplus.net
- 14,263
- 1,767
- 113
- Location
- Dayton, OH
Isn't a 5.9 about the same as a 8.3? (Yes, I know there are differences but I'm talking size.)
If that is the case then yes, it would be a tight fit like a 5.9.
And Deuce is spelled Deuce, not duece. And yes to Pat, there is no G in Cummins.
If that is the case then yes, it would be a tight fit like a 5.9.
And Deuce is spelled Deuce, not duece. And yes to Pat, there is no G in Cummins.
oboyjohn
Active member
- 340
- 121
- 43
- Location
- Quebec , Canada
How about an 8.2 Detroit fuel pincher V-8? We ran these engines in our deuces up here in Canada. Instead of a manual shift tranny, we had Allison MT643 automatics behind them.
- 9,580
- 218
- 63
- Location
- Dickson,TN
From my understanding, the GM 8.2 isn't the greatest engine. I think they had a lot of head and head gasket problems. Having said that, my Uncle has one in a C60 he uses on the farm that hasn't gave him any trouble but it only sees light use.
I wouldn't be apposed to dropping one in a deuce but it would be close to my last choice compared to all the other medium duty diesels available.
- 6,088
- 4,493
- 113
The 8.3 looks quite a bit bigger than the 6.7, which is similar to the 5.9.Isn't a 5.9 about the same as a 8.3? (Yes, I know there are differences but I'm talking size.)
If that is the case then yes, it would be a tight fit like a 5.9.
And Deuce is spelled Deuce, not duece. And yes to Pat, there is no G in Cummins.
That being said, I had a guy buy an 8.3 from me and cram it into a dodge truck....