• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Can not get the fuel filter off

moriboy

Member
124
22
18
Location
SW OR
Actually, you don't spin the filter housing. There is a bolt on top of the housing that you use to tighten/loosen the filter canisters.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
And you torque the bolt correctly or they leak or break.

All in the Tech Manual
 

JeffAS

New member
97
0
0
Location
Lessburg/Ohio
I did remove the bolt but it does not want to come off, tried to spin it but still could not move it but it is cold out going to put the bolt back in and start the Deuce to let it warm up and try it again
 

glcaines

Well-known member
3,915
2,595
113
Location
Hiawassee, Georgia
Undo the bolt and tap the side of the housing with a small block of wood or hammer handle. Don't hit it so that you dent the housing. It will pop loose.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks