Canvas ID help

[AMGeneral]

howdy folks,

I need help IDing this canvas,it doesn't fit a 5 ton that's for sure,It has roll ups for 7 bows and is about 3 ft too long and 1 ft too wide for a standard 5 ton bed(8' X 14' ID).

I have ruled out
M54,M813
M125
all dumps(M51 etc.)
M35
M211
All wreckers(M62,M543)

I don't think it fits a M36 LWB deuce or M55 LWB 5 ton because of the side length.

I don't know,Hemett maybe,but out of canvas?

I checked the upwrights for the bows,they are the correct length,so I also ruled that out.

 

[papercu]

There should be a part number on the inside. Wayne

 

[Recovry4x4]

The M36 cover does use 7 bows. Standard size for a 3 pc top for the 36 would be 14X19.
If it is a little higher, you might could add some stops on the staves and have a raised roof M36(A2).

 

[AMGeneral]

Ok folks,I finally remembered to get the part number off the canvas this evening while I was folding it up,

it is
MS 51323-30
John Johnson corp

any ideas?

 

[Chief_919]

M36 cover
NSN 2540-01-438-4960

 

[AMGeneral]

Oh well,fold it up and put it in the storage till I can find someone that is looking for a canvas bed cover for a M36 deuce.