CDR Valve question

[Pstyckiewicz]

So I bought a CDR valve that matched the one that was crushed up in the bed of the truck. My question is the one I bought and the one that was crushed don’t appear to have a deep water fording nipple on top? I have a 2007 M1152A1 6.5 turbo. I did notice that the turbo model CDR valve feeds into the oil filler neck and air intake. There also was a deep water fording cup smashed up as well. Any thoughts on how they plumbed this thing would be greatly appreciated.

 

[Pstyckiewicz]

This is the CDR I bought.

 

[HoveringHMMWV]

I replaced the missing CDR valve on my 2007 M1151A1 with a non-fording CDR valve. I hooked up the hoses from the filler neck and air intake accordingly and left the vent line unattached. I zip tied the vent line up and out of the way and the truck has run just fine. I chose a non-fording CDR because I don't plan on sinking my truck into deep water.

 

[Mogman]

This is the CDR I bought.

You bought a non fording CDR valve, as stated above just tie the unused hose out of the way.

 

[Pstyckiewicz]

Thanks for the info. I’m returning the non fording one. Do you know what hooks up to the air housing unit? There are two spots that appear to need hoses going to it. There is a hose adapter near the intake stack and one on the back side of the air filter housing unit next to the intake.
Thanks,

 

[Autonomy_Lost]

I chose a non-fording CDR because I don't plan on sinking my truck into deep water.

Can't you just hover over the water anyway?

 

[Mogman]

Pictures please

 

[Pstyckiewicz]

Maybe with big enough tires I could just float over.

 

[Pstyckiewicz]

Anyone know where to get the rubber cap/plug for the air filter housing? Part number or something that would fit. I’ve been to home depot but all the rubber pipe caps that are 3inch are actually 3.5 inner diamete.

 

[Mogman]

Anyone know where to get the rubber cap/plug for the air filter housing? Part number or something that would fit. I’ve been to home depot but all the rubber pipe caps that are 3inch are actually 3.5 inner diamete.

Eventually everyone is expected to download and start using the free TMs on this site, all your questions can be answered there, the folks here like to help but continuing to look up readily available information for someone else does get tiresome after a while.
Is this what you are talking about?

 

[Mogman]

Been a long day, sorry.
I think you are talking about #28, it would be helpful if you posted a picture of the "air housing unit" for the other question.

 

[Pstyckiewicz]

No worries. Number 28 is what I need. I did a lot of searching for it but, I didn’t look in the technical manual for it. Now I know.

Thank you