CFM of air compressor

[Brad900]

Does anybody know what the CFM of the deuce's air compressor is? Need to see if it can handle some air tools

Thanks
Brad

 

[Westech]

umm its low. at 2600 RPM it still can not handle a 1/2 inch impact at full use. get a couple good blasts and then its wait for the air to rebuild. I will have a 20 gallon take in line with my air tools for my deuce so it will keep up a little more... but there is no way a deuce compressor would ever keep up.

 

[clinto]

I think Bjorn knows the exact figure.

Also Brad, don't forget the Ga Rally on 29/30 of this month at Helen at Unicoi Park.

 

[cranetruck]

Hmmm...about 7 cfm.
I have no problem with intermittant use of the 3/4 impact for lug nuts etc.
It's not good for grinders or spray guns for sure.

 

[FreightTrain]

I know it takes 35 minutes give or take to build up 60PSI from Zero in a 60 gallon tank.

 

[kipman]

are the single lung any better?

 

[Westech]

thats what I have is the single pumper.. think there close to the same. nothing of nothing is nothing