• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Changing injector lines

Stan

Member
488
7
18
Location
St.Louis, Mo.
I have a fuel leak at an injector line hydraulic head connection. I was wondering what if anything has to be done after removing these lines. Does the system have to be purged of air? If so what is the procedure?
 

WillWagner

The Person You Were Warned About As A Child
Super Moderator
Steel Soldiers Supporter
8,370
2,326
113
Location
Monrovia, Ca.
Make sure there is no debris in the delivery valve and check closely for rust at the line/delivery valve seat area on the lines, pump and nozzle. If there is, green scotch brite will remove it with out damage, clean it out with a generous helping of brake cleaner. It should self purge the air out. TORQUE the lines!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks