Charge air hoses... Anyone have a lead?

[spankybear]

Well changing my belts have turned into quite the lesson on what not to do. In my lessons I damaged the charge air hose on the cool side. I was wondering where I can get a replacement. The parts manual shows only a OEM part number an in my attempt to cross the number has ran into a dead end. Anybody have a lead or something that might work?

 

[coachgeo]

take your parts to a Parker store and see if they can make up what you need?

 

[B-Dog]

You can replace them with silicone from a myriad of sources but yours are longer than most so check the length.

Intercooler Piping

We have the silicone hose you need.

www.siliconeintakes.com

 

[spankybear]

Thanks for the help... I found some on ebay... took a bit of searching.

*US Military Garde* Synthetic Rubber Hose Diameter 2-1/2" x 6" Long, Made in USA | eBay

NSN, Hose non metallic 4720-01-370-5417

www.ebay.com

 

[GTR0419]

For future reference on all things hoses, Pirtek is an excellent source. They made fuel lines for my M1078.

 

[Reworked LMTV]

Thanks for the help... I found some on ebay... took a bit of searching.

*US Military Garde* Synthetic Rubber Hose Diameter 2-1/2" x 6" Long, Made in USA | eBay

NSN, Hose non metallic 4720-01-370-5417

www.ebay.com

Be sure these are relatively new. Get the production date if you can. I got burned in one purchase. The silicone was too old. I used HPS for my fittings.

 

[spankybear]

Be sure these are relatively new. Get the production date if you can. I got burned in one purchase. The silicone was too old. I used HPS for my fittings.

Interesting... I have the package here and there is no expiration date. The DOM is 4/09 and seem fine. I am going to use them. I wanted factory as they are thinner than the HPS ones. there isn't a lot of room there...