- 350
- 508
- 93
- Location
- St. Joseph Missouri
Hello, just tried to fire up an H140 got from the auction and the purge switch wasn't doing anything.
Turns out the purge valve went bad, was partially taken apart and then left in an incomplete state.
If possible could someone post good pics of the whole assembly with all the fittings and tubes?
I'm looking at the -24p parts diagram and frankly it looks like I'm missing quite a few items.
I'm considering opening up a parts wanted ad on here for the entire assembly as well.
Its a Suntec pump as some looking through the -24p seems to indicate some differences if you have a Suntec vs Webster pump.
Turns out the purge valve went bad, was partially taken apart and then left in an incomplete state.
If possible could someone post good pics of the whole assembly with all the fittings and tubes?
I'm looking at the -24p parts diagram and frankly it looks like I'm missing quite a few items.
I'm considering opening up a parts wanted ad on here for the entire assembly as well.
Its a Suntec pump as some looking through the -24p seems to indicate some differences if you have a Suntec vs Webster pump.