dom1986ck30
Member
- 80
- 1
- 8
- Location
- Haleiwa/HI
Aloha ALL, It has been quite some time since I have visited SS. I hope all is well and you are having a great Thanksgiving weekend, amid all the diversity, mayhem, and health matters. Nonetheless, I have a situation. I have had a good running M1008 for a good stretch, but it is now time to restore the interior electrical. I have the dash and old wires removed. I am installing the new, (Hillbilly Wizard), replacement harness from an original CUCV. I am looking at my circuit board and I have a new, again replacement, and I believe there is a difference from the one that is on there now. I believe it was a civy circuit board that I have been using from the previous owners workings, and that the setup has changed because of or due to...?
The long story short answer is, should I just leave the civy circuit board? Even though I purchased a replacement from Hillbilly Wizard, I will do whatever is simple. I have a feeling that I will get replies about whether I want to put back the blackout lights, and other related military instruments that were a part of the setup. So,, to let you know, I do not want to use those devices and gadgets. Will it matter to use the civy vs. original? All feedback is really appreciated. Aloha and Mahalo...
The long story short answer is, should I just leave the civy circuit board? Even though I purchased a replacement from Hillbilly Wizard, I will do whatever is simple. I have a feeling that I will get replies about whether I want to put back the blackout lights, and other related military instruments that were a part of the setup. So,, to let you know, I do not want to use those devices and gadgets. Will it matter to use the civy vs. original? All feedback is really appreciated. Aloha and Mahalo...
Last edited by a moderator:
