M2116x6
New member
- 16
- 0
- 1
- Location
- Langhorne, PA.
Does anyone manufacture an adapter to go from civilian trailer wiring plugs to the military "M" series plug?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Civilian to military wiring adapter?
- Thread starter M2116x6
- Start date
- 7,058
- 148
- 63
- Location
- Mid Hudson Valley NY
I told the gu y from Vinatge Wiring Harnesses in Maine to make some, as they would sell, but he didnt. I made my own....
M725
Member
- 245
- 1
- 18
- Location
- Ellicott City Maryland
It is easy to make your own. I made one, I use on all my trailers.M2116x6 said:
Barrman
Well-known member
- 5,274
- 1,795
- 113
- Location
- Giddings, Texas
RE: Re: Civilian to military wiring adapter?
Nobody makes one that I am aware of. It is such a simple thing to make though. I have seen it done several different ways.
If you start with a new or good trailer lead that has the Packard fittings (Male metal plug, female boot), just buy some of the ones that plug into them (Female metal plut, male boot) and run those wires into a truck side of whatever trailer plug style you want. This will connect your M truck to any trailer you have and allow you to unplug the civilian stuff if needed and hook up to any M trailer.
I started off with a cut up trailer lead, so I just hard wired in a 6 pin metal round civilian plug on the end of it. It works great.
Nobody makes one that I am aware of. It is such a simple thing to make though. I have seen it done several different ways.
If you start with a new or good trailer lead that has the Packard fittings (Male metal plug, female boot), just buy some of the ones that plug into them (Female metal plut, male boot) and run those wires into a truck side of whatever trailer plug style you want. This will connect your M truck to any trailer you have and allow you to unplug the civilian stuff if needed and hook up to any M trailer.
I started off with a cut up trailer lead, so I just hard wired in a 6 pin metal round civilian plug on the end of it. It works great.
devilman96
New member
- 2,056
- 17
- 0
- Location
- Boca Raton, FL
RE: Re: Civilian to military wiring adapter?
I've made a couple of these and have meant to get them listed in the store... Give me this this eve/tomorrow and I will get some pics posted of them.
I've made a couple of these and have meant to get them listed in the store... Give me this this eve/tomorrow and I will get some pics posted of them.
devilman96
New member
- 2,056
- 17
- 0
- Location
- Boca Raton, FL
Ive made a few of these for CUCV owners whom wanted to keep their harness intacted (IE not cut it up) but they will work on any MV...
Only thing to keep in mind is that if you have a 24V system as most are (M35, M998, etc) you will need to install 24V bulbs in your trailer.. http://www.odiron.com/store/product_info.php?products_id=665
Or get a set of mag mount lights and install 24V bulbs so you can pull any civy trailer!http://www.odiron.com/store/product_info.php?products_id=666
Only thing to keep in mind is that if you have a 24V system as most are (M35, M998, etc) you will need to install 24V bulbs in your trailer.. http://www.odiron.com/store/product_info.php?products_id=665
Or get a set of mag mount lights and install 24V bulbs so you can pull any civy trailer!http://www.odiron.com/store/product_info.php?products_id=666
Attachments
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 757
- 113
- Location
- Cincy Ohio
I have a "from the military" cable that goes from a deuce socket to a civy connector that is different from Mike's. Let me get some pics tonight and I'll post up.