• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Civy rear shocks for A2

lpcoating

Well-known member
Supporting Vendor
388
762
93
Location
Mansfield, PA
I just replaced the rear shocks on my A2 with Monroe part #66627. Around $35 each on Rock Auto. I went this route as I didn't want to buy a 30 plus year old NOS shocks. The last NOS lasted about a year.

Note: The compressed length is the same but the extended length of the Monroe is approximately 1" shorter than the original. I don't think this is an issue.

20230910_115609.jpg

20230909_140428.jpg
 

nattieleather

Well-known member
1,883
145
63
Location
Cleveland, OH
I think an inch shorter should be okay. An inch longer and you may have problems. Way back when I had a M151A1 a surplus dealer sold me a set of new commercial shocks that were about an inch longer and when I would trail ride the vehicle and one of the rear A arms would drop that extra inch would let the coil spring fall out. That was a real pain. Once I got the correct shocks that problem went away.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks