Clare Michigan show, August 15-17

[AJMBLAZER]

Is there a price for someone looking to just attend?

I *MIGHT* have Big Ugly moving by then...maybe. If not I'll probably not come.

 

[ida34]

Flat black it is, it's aready cut and packed with the stuff for the show. Just see me at my table or send Ted over to pick it up for you. I'll be there all day saturday with a decal table.

Anyone else? Last call is coming up quick!

You bringing some standard stock stuff also? If so what?

 

[Bob H]

No charge for anyone to attend the show / swap area on foot.
No charge for GLMVPA members to display and or sell.
Registration is free for GLMVPA members.
GLMVPA membership is only $15 per year.
Parking a vehicle in General Jim's parking lot is free and no registration is required.
Walking the show & swap meet area is FREE!

No swap meet sales in the store parking lot.

 

[TedG]

Right on Bob H!!!

Also, I talked to Clint Barber this morning and he has been bust'in his but setting this swap meet up. So make sure we all thank him for his time! He said if anyone can show up Thursday, that would be fine.

I was going up on Thursday but front axel parts have not arrived yet for the M185A3 (TNJM!) so I will go up Friday early am via 127 from Lansing.

pm me if you need specific parts, tires or other cool mv stuff!

 

[67Beast]

Flat black it is, it's aready cut and packed with the stuff for the show. Just see me at my table or send Ted over to pick it up for you. I'll be there all day saturday with a decal table.

Anyone else? Last call is coming up quick!

You bringing some standard stock stuff also? If so what?

Yep, I'm bringing lots of standard stuff in both decals and paint masks. If you need something specific, let me know and I'll make sure I put it in the box of stuff to go. If you need items like registration #'s or bumper #s let me know what ya need.

 

[CCATLETT1984]

Hey Lane, need you to remember some stuff.

for M37:
spare tire carrier for inside bed (and the large nut that hold the tire on)
pass. side inner fender.
pintle if ya have one.

looking for the bows for for the rear canvas as well.

For me:
syrup

 

[ida34]

Ted,
I may be heading up on Friday also but not until noon or so. I am also going up 127. If you are going to leave later than early let me know. If we are pretty close to the same time leaving we could convoy.

Chuck

 

[citizensoldier]

Hey Lane, need you to remember some stuff.

for M37:
spare tire carrier for inside bed (and the large nut that hold the tire on)
pass. side inner fender.
pintle if ya have one.

looking for the bows for for the rear canvas as well.

For me:
syrup

I have the inner fender... No on spare tire rack... Good luck might want to check ebay.. Pintle? I think I have a mount but no pintle.. Does your uncles truck have the big hole swivel old style or the single small hole non rotating pintle? There are two types on a M37 depending on year..

 

[citizensoldier]

Here is my wish list..
800 series muffler
deuce cargo cover and bows
M135 rims
some more 15.5/20 R XL tires
deuce winch, PTO, shaft
M52 winch shaft
800 series air filter
flasher/strobe light kit
1100/20 NDT's
fyber glass troop seats for deuce
M37 winch shaft
ACME Canadian M37 trans PTO
display radios for CUCV and deuce
Any 251 flathead parts

 

[CCATLETT1984]

Hey Lane, need you to remember some stuff.

for M37:
spare tire carrier for inside bed (and the large nut that hold the tire on)
pass. side inner fender.
pintle if ya have one.

looking for the bows for for the rear canvas as well.

For me:
syrup

I have the inner fender... No on spare tire rack... Good luck might want to check ebay.. Pintle? I think I have a mount but no pintle.. Does your uncles truck have the big hole swivel old style or the single small hole non rotating pintle? There are two types on a M37 depending on year..

What size is the big hole?

 

[gimpyrobb]

Hey Lane, need you to remember some stuff.

for M37:
spare tire carrier for inside bed (and the large nut that hold the tire on)
pass. side inner fender.
pintle if ya have one.

looking for the bows for for the rear canvas as well.

For me:
syrup

...AND Jeff's racks

 

[TedG]

Chuck,
I would like to leave after the morning drivers are off the roads. So I was thinking about leaving around 9am or 10am. I am 100 miles to Clare so it should take 2 hours. If you are behind me then at least I know I will have a backup plan Anyone else coming from central lower MI?

I also might flat tow my hmmwv behind the M185A3 but first the front axel work has to get done. So time will tell on that.

Guys, keep posting your wish lists and I will bring what I have to dicker and deal with.

Bob H. I replied to your email but it bounced back...I will bring a set of new bias tires...

See you all there.

 

[citizensoldier]

Hey Lane, need you to remember some stuff.

for M37:
spare tire carrier for inside bed (and the large nut that hold the tire on)
pass. side inner fender.
pintle if ya have one.

looking for the bows for for the rear canvas as well.

For me:
syrup

...AND Jeff's racks

Jeffs racks are in the truck ready to go.. Anyone have just the seat part of troop seats for a deuce in the fyberglass green? I found some uprights but no flip down seat part..
As yes keep posting any needs.. I have lots of deuce, M37 and some WC parts..

Oh and I have plenty of syrup so if you want some speek up..

 

[TedG]

hmmmm, mv parts for syrup....yum. I definately would like a jug or two Lane!

 

[knattrass]

Here's what we thought we bring:
M37 passenger seat back frame with spings/sandblasted/primed
M37 VPW seats (board/foam) all 4 seats, vinyl covered
M37 New Life Canvas Seat Covers in bag(for the VPW seats)
Unmounted 9x16 Denman NDT with flap/tubes (qty=5)
M37 Sandblasted/e-primed/painted wheels (qty=5)
M37 Takeoff Denman Mud Dawg tires/tubes/90% tread (qty=4)

If someone is interested:

7000lb engine lift -tow behind - comes with wheel/tires, might be missing a wheel bearing.would require truck/trailer because I don't have time to put together!!

Be there Saturday afternoon

 

[CCATLETT1984]

Here's what we thought we bring:
M37 passenger seat back frame with spings/sandblasted/primed
M37 VPW seats (board/foam) all 4 seats, vinyl covered
M37 New Life Canvas Seat Covers in bag(for the VPW seats)
Unmounted 9x16 Denman NDT with flap/tubes (qty=5)
M37 Sandblasted/e-primed/painted wheels (qty=5)
M37 Takeoff Denman Mud Dawg tires/tubes/90% tread (qty=4)

If someone is interested:

7000lb engine lift -tow behind - comes with wheel/tires, might be missing a wheel bearing.would require truck/trailer because I don't have time to put together!!

Be there Saturday afternoon

we need a single m37 rim and tire for a spare for my uncle's m37
also trying to find the tire carrier for inside the bed.

 

[67Beast]

Packed most of my stuff tonight. I'll be ll ready to roll out early Sat. morning. Last chance for any specific decals or paint masks.


See everyone on Sat.

 

[Junkyard Wars Crusher]

...AND Jeff's racks

Jeffs racks are in the truck ready to go..

You guys are the greatest! Thanks fellas!!!

 

[Armada]

Went to the show in Clare today. Didn't drive any MV's this year though. The M146 trailer that I was going to bring up behind the M818 had an issue with the brakes overheating not too far from home. The hubs got real hot. I let them cool a bit and brought it home. It would 'free wheel' without the air attached to the trailer, but I didn't know for sure if I had cooked the grease or not. I ended up just driving the car up. Anyway, had a good time catching up with everybody and checking out all the OD (and tan), mv's.
Here are a few pics. I'm sure some others will post more, Dave (67beast) was snapping a few.

 

[Bob H]

Made it home, despite completly loosing the rear brakes and the dust that used to be u-joints in the front driveshaft.

Two trailers wasn't enough of a challenge for Dave P

Man I forgot to get reflectors!