anjay22
Member
- 200
- 2
- 18
- Location
- Seguin, Texas
Has anyone attempted this? If so, go....
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
class 3 hitch
- Thread starter anjay22
- Start date
jbayer
Member
- 675
- 7
- 18
- Location
- St. Aug., FL/ McGrady, NC
You need to be little more specific. Is this a question? Attempted on what vehicle?
It's way past the attempted stage on Deuces, if that's the question.
Lots of people have them on their MV's. Myself included.(Deuce)
It's way past the attempted stage on Deuces, if that's the question.
Lots of people have them on their MV's. Myself included.(Deuce)
quickfarms
Well-known member
- 3,495
- 25
- 48
- Location
- Orange Junction, CA
Curt makes several nice ones for the 34" frame on the duece.
Here are 3 of there part numbers
15400
15605
15800
Here are 3 of there part numbers
15400
15605
15800
anjay22
Member
- 200
- 2
- 18
- Location
- Seguin, Texas
Is that the width? Is that between the frame?
steelandcanvas
Well-known member
- 6,187
- 85
- 48
- Location
- Southwestern Idaho
Yes. If you scroll to the bottom on the page, you'll find a listing of similar threads.
dmetalmiki
Well-known member
- 5,523
- 2,028
- 113
- Location
- London England
I have one now on my f350 army air force ambulance, also a step clips in there as another (home made) option.
Attachments
silverstate55
Unemployable
- 2,075
- 872
- 113
- Location
- UT
Made my own from a well-used hitch my boss gave me. Cleaned it up, disassembled it, and rebuilt it to my specs.
rustystud
Well-known member
- 9,280
- 2,988
- 113
- Location
- Woodinville, Washington
Nice work ! I especially like the large "D" rings you installed. You'll have no problems hooking up the safety chains.
silverstate55
Unemployable
- 2,075
- 872
- 113
- Location
- UT
Thanks! I've used it several times (have a 12-volt trailer lights conversion installed, just not in photos above) & it works GREAT.
HanksDeuce
Well-known member
- 1,081
- 242
- 63
- Location
- Prairieville, LA
Not sure who's picture I "borrowed" off the internet, but in the first picture below it looks like somebody had an aftermarket deuce hitch that failed. So to keep that from happening to me I wanted a custom hitch built to my specs.
Although it isn't designated with a class rating I like my custom hitch fabbed by Black Rock Fab. I needed a 28 inch drop to haul my civy trailers. 2 inch bar stock baby. No adjustments needed to either tow a military trailer or a civy trailer. Just back up, connect everything, and go!
Although it isn't designated with a class rating I like my custom hitch fabbed by Black Rock Fab. I needed a 28 inch drop to haul my civy trailers. 2 inch bar stock baby. No adjustments needed to either tow a military trailer or a civy trailer. Just back up, connect everything, and go!
Attachments
rustystud
Well-known member
- 9,280
- 2,988
- 113
- Location
- Woodinville, Washington
I like your hitch Hank ! The picture of the broken one looks like it was a home fab job. My hitch was made by "Curtis" and uses 1/4" thick tubing. I don't worry about it breaking, and I know your's will never break !
lino
Member
- 148
- 2
- 18
- Location
- Wake Forest, NC
Here are some pics of mine. I integrated my rear winch fairlead into it too.
It's height adjustable and removable with 4 pins. When out, the brace rods stow in the brackets at the edge of the fairlead.
It's height adjustable and removable with 4 pins. When out, the brace rods stow in the brackets at the edge of the fairlead.
rustystud
Well-known member
- 9,280
- 2,988
- 113
- Location
- Woodinville, Washington
Hey lino, did you ever come up with a replacement fuel filter base ? I liked the design of the one you where mocking-up in your CAD program.
lino
Member
- 148
- 2
- 18
- Location
- Wake Forest, NC
Hey Rustystud, machining that part is next on my "Deuce List", but unfortunately, other areas of my life seem to have no respect for my time available to work on it...
I'm hoping to get to it in the next couple weeks. I'll definitely post progress as I go.