Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Just not good. 
very fun!!!
Worked on drilling some holes for the bumperettes that i never finished and went to Napa to get oil filters. Pulled back in to the shop and the brake pedal went to the ground 
One of the brake lines came loose and drained a ton of fluid 
so i decided that the little brackets were a good idea to put back on 
So how long did it take you to get out. Looks like you were digging through the snow pretty well (at least down).Here is the Deuce plowing in to a pile of snow
But it was fun We were taking turns doing that!!
that right there is the finest wifey quote i heard in a long time.
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]"){kind=icon}
So some more time on here and I ran across a old post where a guy got a old 80s break switch and made a bracket, wired it in and wala brakes!!!! So being the redneck I am and the looming blizzard tonight and the thought of not playing in the snow..... Well getting a ticket for no break lights 
I went to auto zone and started work. It was realy easy!! Just made a c shaped bracket put the switch on it and bolted it to the truck. I think it is better than the oe. Will post some pics later.
BTW the temp is going to be in the 60+ Saterday
and so I managed to get two 12 volt plugs installed, a keyed handle (need some green paint), and a keyed start
Still waiting on my heater should be here on the 17th
Spent some time trying to find out what gasket to use. Could not find much localy so i called Permatex and they said all their prodects are good for Brake fluid.
My seam riped out on the front of the soft top and couldnt find a shop that wanted to mess with it so.......... I got some glus that is suposed to work for this kind of thing and am trying to sew it back togeather. I can gurantee it wont b to purdy but i think it will hold up ok.
Mike has some great mods on his trucks and also got to see (lucie) Plums new M35 with gun ring soooo jealous!!!!! Any way had a blast getting to hang out with some more "krazy" people Here are some pics of Lucie (i may not b spelling it correct) When we took the ammo boxes buy my boys were ready to put a gun on and take off shooting and driving 
We will see...
good lookin build ya did, hey would ya PM me the guys info you got the tires from is he a member on here?Very nice I'll post some pics of the full auto shoot when I get them uploaded
Firemedic230 the rims are factory (trying to decide what to put on 10 lug adapters or mod hemmitt) but the tires are 395s and I got them from a guy in Norman. I can pm you his info if you like. Bobbing one is not bad am thinking the next time I'll cut down the bed and use front deuce springs. Not 105 parts. I realy like the looks of the cut down bed but this is my first MV so I am still learning. If you have any questions let me know I'll try to help any way I can.
Also Mike has a nice sight XM381.com and he is here in Edmond.
would rather work on the Deuce. Any way I'll finish it up tomorrow. Will post some pics after I get it finished.
