- 7,409
- 2,501
- 113
- Location
- Interlachen Fl.
Take it apart now and sand blast the ruff and paint the truck. More pics to come.
Took off the box / spair carrier and will make a custom rack. It's been done here but I will just add one more box on top of the one there. but the outher side where tire goes I have some 120 mm boxes that are like three feet tall and will fit nice in the given channling just have to run one high brace and a latch bar on the end. They will stand up and there should be about four or five storge boxes. I like these for long chain and strap storage. I have a winch and will decide if it goes on this truck or another build.
I used a locker in the rear and have the energy put one up front.
This is a GSA truck Pete got for me Thanks Pete.
Used Travis's figures and the bed placement came out real good. Have not put the lazar on it yet. There is a rivit you can use for the forward mount placement. I went 1/16 off.
Took off the box / spair carrier and will make a custom rack. It's been done here but I will just add one more box on top of the one there. but the outher side where tire goes I have some 120 mm boxes that are like three feet tall and will fit nice in the given channling just have to run one high brace and a latch bar on the end. They will stand up and there should be about four or five storge boxes. I like these for long chain and strap storage. I have a winch and will decide if it goes on this truck or another build.
I used a locker in the rear and have the energy put one up front.
This is a GSA truck Pete got for me Thanks Pete.
Used Travis's figures and the bed placement came out real good. Have not put the lazar on it yet. There is a rivit you can use for the forward mount placement. I went 1/16 off.
