• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Clutch adjustment?

115
3
18
Location
Southwest Virginia
When I let the clutch out it doesn't catch until the pedal is all the way out. Sometimes I will hook the pedal with my toe and finish pulling it up for the last inch. Can I adjust this and where should the clutch begin to engauge during the travel from all the way down to full out?
 

dmetalmiki

Well-known member
5,523
2,028
113
Location
London England
You should adjust the mechanism to give 2" of free play. However when the play is all "at the top" of the pedel release, it usually indicates time for a clutch plate re-replacement. (cluth and perhaps pressure plate)
 

Floridianson

Well-known member
Steel Soldiers Supporter
7,409
2,503
113
Location
Interlachen Fl.
Before adjustment I would check the return spring is good and tight. The throw out bearing should be checked by eye by way of the inspection plate when the motor is running.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks