CMOS BATTERY

[geomur]

I have a 806B Generator .The engine starts and runs but will not switch over to power. First time this has happened Could low voltage to CMOS causing this.
I have pulled back cover off computer and the round black area is covered with silicone. How does that come apart?

 

[Guyfang]

I have a 806B Generator .The engine starts and runs but will not switch over to power. First time this has happened Could low voltage to CMOS causing this.
I have pulled back cover off computer and the round black area is covered with silicone. How does that come apart?

Yes, that could be the reason it puts out no voltage. Look up SS member listed below. Ask him about the disassembly of the CIM.

Peapvp

 

[geomur]

I have a 806B Generator .The engine starts and runs but will not switch over to power. First time this has happened Could low voltage to CMOS causing this.
I have pulled back cover off computer and the round black area is covered with silicone. How does that come apart?

Guyfang can you help Generator runs but will not switch over to generator light on back wall refers to cmos voltage low I have looked into computer and I do not see any batterie pompartment

 

[Guyfang]

I believe this is the CMOS battery.

 

[frank8003]

freakin electronics to hate

 

[Guyfang]

Yes, sir, Buddy!

 

[geomur]

View attachment 818314

I believe this is the CMOS battery.

My board is in two pieces and looks nothing like yours the number on the boards are as follows. ONLY ONE BOARD HAS A NUMBER AE 1008-6948 Manuf Pin 96-23747 Rev Serial # 6912

 

[Guyfang]

Show me pictures.

 

[geomur]

View attachment 818314

I believe this is the CMOS battery.

Here are the photos

 

[Julio Wu]

Here are the photos

Mine is the same as you. Is there a problem with yours?