Crazy wrench head bolts Deuce

[frank8003]

Crazy wrench head bolts Deuce
Just some stuff to post here.
Sometimes my files disappear, don't know why.
Maybe I was bad. But don't want to loose these.

 

[WillWagner]

Here's one I made years ago after breaking 3 of those cad plated pos wrenches the surplus dealers were selling.

 

[dmetalmiki]

I cranked a regular ring spanner (wrench) using heat, and it worked just fine.

 

[M543A2]

For the adapters that have the 1/2" drive socket offset from the hex socket end, how do you calculate your actual applied torque? The added leverage of the offset will give a higher torque on the fastener than your wrench is showing. The adapters that have the 1/2" drive socket directly above the hex socket end via means of the multiple offsets give a 1 to 1 reading as one wants to be accurate. Pictured is a military surplus wrench I have which gives accurate direct reading.

 

[doghead]

http://cncexpo.com/torqueadapter.aspx

If it is at 90 degrees to the lever(handle) it does not matter.

 

[WillWagner]

^^What he said.

 

[rtadams89]

I have obviously never had to remove the bolts these tools are designed for. What do you need these for?

 

[gimpyrobb]

Nuts holding the heads to the block on the driver side.

 

[frank8003]

here is more crazy wrench data
View attachment crazy wrench 3.pdf

View attachment crazy wrench 1.pdf