Crossover steering box question

[M1009Kev]

Hi all, I'm new here and have been doing a lot of searching, but can't seem to find the info that I'm looking for.
I have an M1009 with the stock 6.2. The steering box has four hoses -- two from the pump and two going to the master cylinder.

My understanding is that I would need a 2wd steering box for the crossover. But my question is where do I find a 2wd box with the four ports that's made for the M1009s?

Any help would be appreciated,
Kevin

 

[rcamacho]

You only need a 2wd sector shaft. Great time to rebuild the box with new seals / bearings.

Most Saginaw boxes only came with 2 fittings for power steering pressure/return.


Sent from my iPhone using Tapatalk

 

[M1009Kev]

You only need a 2wd sector shaft. Great time to rebuild the box with new seals / bearings.

Most Saginaw boxes only came with 2 fittings for power steering pressure/return.


Sent from my iPhone using Tapatalk

Thanks rcamacho! That would make things so much simpler -- I never thought of that.