• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

CTIS change over

jimbo66348

Member
112
3
18
Location
Frankfort, n.y.
Well, the buttons don't always work, and I thought that if I put a pressure gauge in the dash and a 3-position switch; it would be better. I'm not at all familiar with the wiring on these, but I'm learning.
 

Andyrv6av8r

Well-known member
Steel Soldiers Supporter
1,198
452
83
Location
Spartanburg,SC
It would be a little more complicated than that. You would have to devise a way of supplying 12 to 15 psi of air to deflate the tires to the next lower level. I would suggest another ECU with good buttons and leave it as it came. Probably cheaper and a lot less work.
 

ladoublet

Member
Steel Soldiers Supporter
Supporting Vendor
84
12
8
Location
Natchitoches, Louisiana
Using the M929A2 Dump for construction. Need to remove all CTIS components and use visual sight in morning for operator to fill tires. Don't have mechanic to check CTIS system every morning. Need to get to work and go.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks