coachgeo
Well-known member
- 5,011
- 3,362
- 113
- Location
- North of Cincy OH
this is from the latest Dana manual buttt.... the previous one has same info.. makes you go hmmmmmmmmmm
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
CTIS computer based diagnostics
- Thread starter coachgeo
- Start date
10Lugger
Member
- 130
- 5
- 18
- Location
- White Post, VA
Are you using the program? Where did you source the cables?
Sent from my iPhone using Tapatalk
- 6,845
- 660
- 113
- Location
- Stratford/Connecticut
On the first gen trucks you would have to use a Y cable, that plugs in between the controller and harness, to give you a diagnostic port to work with. I have never been able to find one of these cables though. On an A1 truck with data bus diag you can plug into the trucks diag port and access the ctis. Not sure about 3126 A1. Never tried. The interface box is a Dearborn protocol adapter. The newer ones are usb. Most of the older ones are serial port to laptop.